Not every apartment or home has ideal air conditioning set up. You might have an AC unit in just one room, which might not be the room you spend your time in. In these situations, it’s important to know how to get air conditioning from one room to another.
1. Purchase a wall air conditioner and extend the exhaust hose with a dryer hose.
One of the easiest ways to transfer your air conditioner from one room to another is by using a wall air conditioner. These are available at any home improvement store. You can buy one that’s exactly the size you need, and then simply extend its exhaust hose with a dryer hose (they’re both flexible plastic tubes).
Now that your equipment is in place, it’s time to make holes in the walls and ceilings. If you’re lucky, there will already be an existing duct or venting system running through your house; otherwise, you’ll want to start by drilling a hole in each wall of your desired room—one for each side of the air conditioner—and find out which way it blows hot air out of its unit before cutting either end off so that only one opening remains (that’s where the cool air will come into).
2. Use an exhaust fan as an intake fan.
The second option is to use an exhaust fan as an intake fan. You can use the same hose and vent to connect the two rooms, but you’ll have to reverse the direction of your exhaust fan to pull air from one room into another. The principle here is still simple: if you’re going from one room with a high temperature and low humidity level into another room with a lower temperature and higher humidity level, it will be easier for your system to move warm air out than cold air in (and vice versa).
3. Cold Air Return Trick
If you’re lucky enough to have a ceiling fan in the room where your air conditioner is located, you can use it as a sort of radiator to move cool air from one room to another. The principle is simple: The heat from the A/C unit will cause warm air to rise and be sucked away through its vents. This will pull in cool air from surrounding rooms, creating an indirect path for cold air without having to run ducts or install HVAC equipment. It might take some trial and error before you find an optimal location for this trick, but it should work well with most modern ceiling fans.
4. How to get cold air from upstairs to downstairs
If you want to cool down the downstairs, but are limited by the fact that it’s on a separate floor than the thermostat, there are some things you can try. First, consider installing a ceiling fan in your living room.
A lot of people think they should use a fan to move air from one room to another when they’re trying to cool down their whole house, but this isn’t always true—especially if your upstairs is cooler than the downstairs! If you have an existing ceiling fan (or decide to install one), turn it so that its blades are blowing downward instead of upward—this way, it’ll pull cold air from outside through open windows and into your living room without cooling off upstairs as much as you’d like.
5. Put in a ceiling fan…and reverse it!
If you have a non-powered ceiling fan, use this technique to get air circulating in a room.
- Make sure the fan is not blocked by furniture. If it is blocked, the blades will not be able to move and will just make noise without creating any cooling effect.
- Make sure the fan is not blowing directly on you. If it does, that’s fine—depending on how hot or cold you are, this could feel great! But if your goal is to cool down an entire room, then try reversing your ceiling fan so that it blows across the room instead of toward you (if there’s only one person in the room).
- Make sure the blade tips do not hit walls or other obstacles as they spin around. This can damage them over time, which makes them less efficient at moving air around than new blades would be!
Things to remember:
- Make sure the fan is not blocked by furniture.
- Make sure the fan is not blowing directly on you.
- Make sure the fan is not blowing directly on a wall.
- Make sure the fan is not blowing directly on a window.
- Make sure the fan does not blow directly on a door.
You can move air conditioning from one room to another with these tricks!
There are many ways to move air conditioning from one room to another. You can use any of the tricks above, or you can combine them to get the most efficiency and comfort in your home.
You could use a ductless mini-split system, which is similar in design to central air conditioners but mounts onto a wall instead of being installed in an attic or crawl space. These systems have the advantage of being quiet and easy to install, but they do have some disadvantages: they’re not as powerful as regular central air conditioners; they have short life spans (typically less than 10 years); and they require more electricity than central units because they need two compressors instead of one.
You could also purchase a ducted central unit with dual compressors that cools both your home’s interior and exterior spaces simultaneously—this option is ideal for homes where there isn’t enough room on either side of an exterior wall for an AC unit without intruding into people’s yards or gardens (or taking up too much space inside). Ducted systems are more expensive upfront than other options but last longer overall since you don’t have to replace them as often due their higher durability rating compared with other types like window units or portable ones.
Contact Lions HVAC in Los Angeles for all Your AC Needs!
We hope you found these tricks helpful! Remember to take into consideration the type of air conditioning unit you have, because many of these will only work with central or window AC units.
Keep in mind that you may need to install the ductwork yourself, so if you aren’t sure if it is possible, Lions HVAC in Los Angeles is the expert you need!